How to Update Your OKIOCAM S (Windows)

1. Connect your OKIOCAM to your computer using the attached USB cable.
2. Go to www.okiolabs.com/download (click to open in a new tab).
3. Under the Windows heading, click on OKIOCAM Firmware Update Tool to start the download.
4. After the download has completed, click on the upward-facing arrow in the bottom left-hand corner.

5. Select Show in folder.

6. After File Explorer has opened, right-click on the downloaded file and select Extract All.

7. In the new window that appears, select Extract.

8. Once complete, the extracted .exe file will automatically open in a new File Explorer window, double-click on it.

9. The OKIOCAM Firmware Update Tool will open. Click Update.

10. Confirm that you wish to proceed with the update by clicking OK.

11. Your OKIOCAM’s firmware will then be updated. The process normally takes no more than several seconds. Once the update is complete, you will see the message below. Disconnect and reconnect your OKIOCAM.

12. After reconnecting your OKIOCAM, you will see the message below. Click on the X in the top-right corner to close the OKIOCAM Firmware Update Tool.